Survey of Both Past and Modern Printers

Home
>
Computer Hardware
>
Survey of Both Past and Modern Printers

Survey of Both Past and Modern Printers

Printers are on-line devices initially categorised as being either impact whereby a printing head assembly of some type is in physical contact with the paper, and non-impact where there is no mechanical contact with the paper.

Impact printers:

Dot matrix printers; employ a set of pins that can be projected or withdrawn as required to form a dot matrix of the required character that is fired through an inked ribbon to form characters on an underlying sheet of paper.

Advantages:
Software is often provided by way of firmware, a selection of fonts and text styles can be produced and they are reliable.

Disadvantages:
Dot matrix printer tend to be noisy; They create fuzzy, low-quality characters and are not suitable for light quality or light volume output.

Daisy wheel printers; employ a metal or plastic wheel with raised letter or character embedded into the end of thin strips extending from the centre. The wheel spins to position the correct character under a single hammer which strikes it, forcing the character through an inked ribbon onto the paper.

Advantages:
Software is often provided by way of firmware and they are suitable for light quality output. They create high quality characters and are suitable for high quality or light volume output

Disadvantages:
They tend to be noisy, slow and are not capable of producing graphics.

Barrel (or Drum) printers; employ a revolving barrel that contains a set of 32 characters, each of which has a hammer, which allows each print position to impact the correct letter for that position through an inked ribbon. This mechanism allows all the characters of the same type to be printed simultaneously.

The process is required for all the required characters to build line of text the drum rotates so that the next line can be printed.

Advantages:
They are suitable for high quality, high volume output (up to 2000 lines per minute).

Disadvantages:
They are only able to produce print in one font and style and are not capable of producing graphics.

Chain printers; employ a revolving chain that contains one of more sets of characters which revolves in front of 132 hammers, which allows each print position to impact a character through an inked ribbon as it passes the appropriate place on the line. This mechanism potentially allows a complete line to be printed in one pass.

Advantages:
They are suitable for high quality output and some chain printers are able to produce more than one font and/or style. It is capable of very high speed.

Disadvantages:
they are large free standing printers and are not capable of producing graphics.

Drum plotters; operate by moving a pen across the paper to create horizontally movement and the paper revolves around a drum past the pen to create vertical movement. This mechanism allow text of images to be drawn.

Advantages:
They are capable of producing high quality output and can use large paper (for example A3).

Disadvantages: v They are not suitable for high volume output.

Flatbed plotters; operate by moving pens mounted on a carriage that moves over a board. The carriage moves in 365 degrees over the paper placed on a board under the pen.

Advantages:
They are capable of producing high quality (colour) output and can use large paper (for example A3 or A1).

Disadvantages:
They are large free standing printers that are not suitable for high volume output.

Non-impact printer:

Laser printers; apply an electrostatic charge to a rotating drum inside the printer. A laser or a light-emitting diode then discharges portions of the drum according to a sequence of electronic signals representing images or text that is build line at a time. The drum rotates so that the next line can be created.

As the drum rotates, it makes contact with charged plastic like powdered ink (toner) attaches itself to these discharged sections. A piece of paper that is given a greater charge than the drum is passed over the drum, transferring the toner. The toner is heated and fused to the sheet.

Advantages:
They are capable of producing extremely high-quality text and graphics (including colour) at extraordinary speeds, are suitable for high volume output and the consumable costs are low.

Disadvantages:
They are more complex and considerably more expensive than most other common printer types, require more memory and power.

Ink jet printers; employ a set of nozzles embedded in the print head through which small ink droplets are sprayed onto the page in a matrix of ink dots to form images or text on the page.

Advantages:
They are capable of producing colour text and images with near-photographic quality.

Disadvantages:
They are prone to clogging and the consumable costs are considerably high.

Direct thermal printers; employ an array of heated rods embedded in the print head that selectively burn a matrix of dots on heat sensitise thermograph paper to form images or text.

Advantages:
The consumable costs are lower other prints as ink is not needed. They are capable of producing images as well as text.

Disadvantages:
They are not suitable for light quality or light volume output, and specially prepared papers is needed.

Thermal transfer printers; employ an array of horizontal heating elements, one for each print position that melts ink from a ribbon to form a matrix of dots which is transferred to the pater to form images or text.

Advantages:
They can print very attractive labels on a broad range of media and the consumable costs are lower than some other common printer types.

Disadvantages:
Requirement for specially treated paper. Affected by temperature changes.

Summary:

It is clear that if the sole criteria for decision making is reduced software cost and speed, the Drum or Chain printers will fit the bill.

However te laser technologies and their consumables are not cheap enough to make this a very cost effective alternative assuming there is a need for over say 10,000 pager a year!

Anything else requires a closer analysis of the exact printing requirements to trade off the relevant software costs against other savings and convenience.

I am the website administrator of the Wandle Industrial Museum, http://www.wandle.org

In The News:

SafeNet's Luna EFT Hardware Security Module Achieves PCI HSM Compliance
MarketWatch (press release)
BALTIMORE, May 24, 2012 (BUSINESS WIRE) -- SafeNet, Inc., a global leader in data protection, today announced that its Luna EFT Hardware Security Module (HSM) has achieved PCI HSM compliance. SafeNet received this certification in advance of the ...

and more »

Chattanooga Times Free Press
Golf Mocs aiming for more hardware
Chattanooga Times Free Press
He didn't miss anybody handing Mocs coach Mark Guhne a plaque for winning, or somebody handing Stephan Jaeger hardware for earning medalist honors at the Club at Olde Stone in Bowling Green, Ky. "We'll have to get that fixed," said Hart, ...

and more »

Co.Design
It's Official: Google Is Now a Hardware Company
BusinessWeek
Woodside says Google also plans to use its new hardware division to produce smartphones and tablets that set the pace of innovation in the mobile business. “This is a huge opportunity to really show what Android can do in a well-designed, well-packaged ...
Google becomes hardware company with $12.5B Motorola buyComputerworld
Google becomes hardware company with US$12.5B Motorola buyAustralian Macworld
Google delves into hardware, buys Motorola Mobility for $12.5 billionTechSpot
Co.Design -Washington Post -FierceMobileIT
all 535 news articles »

IceWEB Wins DataCentre Storage Hardware Product of the Year Award
MarketWatch (press release)
IceWEB.com , a leading provider of Unified Data Storage systems for cloud and virtual environments, announced that it has won Storage Hardware Product of the Year Award in the 2012 Data Centre Solutions Awards. In a competitive selection process ...

and more »

Jagran Post
Report reveals fake chips in US military hardware
EDN.com
LONDON -- More than a million suspect counterfeit electronic components have been used in 1800 separate cases of bogus parts affecting US military hardware, according to a report produced by the Senate Armed Services Committee.
Fake millitary hardware concerns USJagran Post
Chinese counterfeit parts in US military hardwareThe Voice of Russia
Chinese counterfeit parts infiltrating US weapons systemMoneylife Personal Finance site and magazine
AllGov
all 197 news articles »

Idaho Mountain Express and Guide
Soccer teams haul hardware home from Boise
Idaho Mountain Express and Guide
Two Sawtooth United FC youth soccer teams brought first-place hardware home from the Idaho Youth Soccer Association's Director's Cup May 18-20 in Boise. The U-16 boys (3-0-0) scored 13 goals in three games led by Jose Ortiz (4 goals) and Andrew Graves ...

IceWb Wins DataCentre Storage Hardware Product Of The Year Award
Data Storage Connection (press release)
IceWEB.com, a leading provider of Unified Data Storage systems for cloud and virtual environments, announced that it has won Storage Hardware Product of the Year Award in the 2012 Data Centre Solutions Awards. In a competitive selection process ...

and more »

Seagate to acquire hardware maker LaCie
MarketWatch
Seagate has agreed to buy a controlling interest in LaCie from the European computer hardware company's chief executive, Philippe Spruch, and his affiliates for around EUR4.05 a share in cash. The offer, which would give Seagate control of 64.5% of ...

and more »

The Mary Sue
Lego for girls, this time hardware-hacker style
CNET
For Limor Fried, a hardware hacker and leader in the booming maker and do-it-yourself movements, there was never a question of waiting for someone else to jump in and do a better job of inspiring girls than Lego has done with its widely-panned Lego ...
Limor Fried, Hacker, Maker, and Owner of Adafruit Industries Designs Legos for ...The Mary Sue

all 9 news articles »

IBNLive.com
Google's 7-Inch Tablet: $199, Coming In July?
InformationWeek
The device will probably be sold directly to consumers via the new hardware section in the Google Play Store, where Google already offers the Galaxy Nexus for $399. Google launched this new hardware sales portal last week, where it will sell other ...
Google Said To Ready 7-inch Tablet For July RetailInvestor's Business Daily
Google, Asus to ship Nexus tablet in JuneIBNLive.com

all 67 news articles »

Google News